Welche Dispositionsarten gibt es?
Bei der Durchsicht der Anrufberichte sehen Sie ein Dispositionsfeld, in dem standardisierte Ursachencodes angezeigt werden, die Ihnen helfen zu verstehen, warum (oder wie) jeder Anruf beendet wurde. Zurzeit nur auf Englisch verfügbar.
- Melden Sie sich unter https://my.jive.com/cr an, um auf Anrufberichte zuzugreifen.
-
Achtung: Die Ergebnisnummer wird beim Export der Datei angezeigt.
| Cause Code | Definition |
|---|---|
| 0: 'Valid Cause Code Not Yet Received' | Indicates that a standard cause code of 1-127 was not received due to a complicated call scenario. |
| 1: 'Unallocated Number' | Wie leite ich eine Rufnummer weiter im Admin-Portal? |
| 16: 'Normal Call Clearing' | Zeigt an, dass ein angenommener Anruf von einem der beteiligten Teilnehmer beendet wurde. Under normal situations, the source of this cause is not the network. Der Anruf kam normal an und wurde entgegengenommen, aber die Gründe für die Ursache könnten sein:
|
| 17: 'User Busy' | Indicates that the called party is unable to accept another call because the user busy condition has been encountered. |
| 19: 'No Answer from User (user alerted)' | Indicates that the called party has been alerted but did not respond within a prescribed period of time. This cause may be generated by internal network timers. |
| 20: 'Subscriber Absent' | Indicates that a user/device is temporarily not addressable. This may be because the extension no longer exists or a device is unregistered. |
| 21: 'Call Rejected' | Indicates that the user or a user-set system setting, like DND, rejected the call from being answered. |
| 22: 'Number Changed' | Indicates that the number dialed by the calling party is no longer assigned. |
| 26: 'Non-selected User Clearing' | Indicates that the user has not been awarded the incoming call. |
| 27: 'Destination Out of Order' | Indicates that the destination indicated by the user cannot be reached because the interface to the destination is not functioning correctly. The term "not functioning correctly" indicates that a signal message was unable to be delivered to the remote party; e.g., a physical layer or data link layer failure at the remote party, or user equipment off-line. |
| 28: 'Invalid Number Format (addr incomplete)' | Indicates that the called party cannot be reached because the called party number is not in a valid format or is not complete. |
| 29: 'Facility Rejected' | This cause is returned when a supplementary service, such as a third party auto attendant, requested by the user, cannot be provided by the network. |
| 34: 'No Circuit/Channel Available' | Indicates that there is no appropriate circuit/channel presently available to handle the call. This may be due to an at-capacity circuit on either side of the call. |
| 38: 'Network Out of Order' | Indicates that the network connecting the caller and callee is not functioning correctly. |
| 44: 'Requested Circuit/Channel N/A' | This cause is returned when the other side of the interface cannot provide the circuit or channel indicated by the requesting entity. |
| 58: 'Bearer Capability Not Available' | Indicates that the user has requested a bearer capability that is not available at this time. Bearer capability is when the calling system requests channel communication attributes at the start of the call, through which to communicate. |
| 102: 'Recovery on Timer Expiry' | Indicates that a procedure has been initiated by the expiration of a timer in association with error handling procedures. This is often associated with NAT problems. |
| 111: 'Protocol Error, Unspecified' | Reports a protocol error event only when no other cause in the protocol error class applies. |
| 127: 'Interworking, Unspecified' | Zeigt an, dass ein Interworking-Anruf (in der Regel ein Anruf zum SW56-Dienst) beendet wurde. |