HELP FILE

Why does the GoTo Room display say "No signal"?

Why does the GoTo Room display say "No signal"?

    If your GoTo Room display says "No signal", there is a missing connection.

    Check the following:
    • Check HDMI cable connections. Make sure all HDMI cables are properly connected to the right ports.
    • Check the display resolution. If you are using dual display, make sure the resolution is set to 1080p on both displays (not 4K). Logitech Rally supports a single display at 4K or dual displays at 1080p each.
    • Check the CAT6A ethernet cable (Logitech Rally). Make sure the ethernet cable between the table and display hub is a certified CAT6A cable and is within the 50m length requirement.