HELP FILE

How do I transmit a page?
Note: Before you can successfully page, your phone must have a paging profile assigned by a system admin.

Page from a Polycom phone

  1. Reboot the phone for the paging softkey to appear.
  2. Press the Paging softkey (displays within the idle screen).
  3. Select the desired zone(s) you'd like to page (Paging Group).
  4. Press the Page softkey (displays in the bottom right of the screen).
  5. Press the End Call softkey or simply hang up the phone to end the page.

Limitations

  • Polycom devices are only able to send and receive pages to Polycom and Yealink devices.
  • You cannot put a call on hold and then page out successfully.

Page from a Cisco phone

1. Dial *96 + two-digit paging zone number or use the multicast paging button on your phone(e.g. to page zone 01, dial *9601).

    • The multicast paging button is only available on certain newer models of Cisco phones.

    2. Hang up the phone to end the page.

    Limitations

    • Can only subscribe to two zones.
    • Can only transmit to five zones.
    • Cisco devices are only able to send and receive pages to other Cisco devices.

    Page from a Yealink phone

    1. To set up multicast paging on a Yealink device:

    • From the admin portal, go to the device and assign a paging profile.
    • Exit the device setup.
    • Re-enter the device setup.
    • Go to the Button Configuration tab and assign Multicast to the desired button.

    2. To page, simply press the multicast button on your phone and enter the paging zone number you wish to reach.

    3. Hang up the phone to end the page.

    Limitations

    • Can only subscribe to 10 zones.
    • Yealink devices are only able to send and receive pages to Yealink and Polycom devices.

    Page from a Panasonic phone

    Depending on your model, you may need to navigate to the device web UI and enable (yes) Send Paging under Multicast Paging.

    1. Press the Paging softkey (displays within the idle screen).
    2. Select the number of the desired zones (Paging Group).
    3. Press the Page softkey (displays in the bottom right of the screen).
    4. Press the End Call softkey or simply hang up the phone to end the page.

    Limitations

    • Can only subscribe to 10 zones.
    • The Panasonic KX-UT670 is not supported.
    • Panasonic devices cannot page to Polycom devices.