Pair your handsets to your base station.

1. Press the Menu key.
2. Select User Settings > Registration > Handset > Next > Next.
3. On the base station, press and hold the Handset Locator key for 4 seconds until the light flashes red.
4. On the handset, press # on the handset to begin registration. The handset will then register within 10 seconds. If a pin number is required, try one of the following: 1590, 1591, or 1592.
   Note: If the pin is not accepted or if registration fails, contact Customer Support for assistance.

Assign a unique line to each handset that is paired with this base station.

1. Sign in to PBX Administration (classic) at https://my.jive.com/pbx.
2. Click Devices in the left sidebar and then choose the Vtech VSP600 that requires additional lines.
3. From Button Configuration, select Line and then choose the desired line.
   Repeat this step for each additional line.
4. Click Save.
5. Power cycle the base station to apply your changes.
6. On the handset, press the Menu key.
7. Select Status > Network and then write down the phone’s IP Address.
8. Open an incognito window in Google Chrome, enter the IP address in the address (URL) bar and then press enter on your keyboard. If the web UI doesn't load, enter https:// before the phone’s IP address.
9. Enter admin for the username.
10. Enter your Device Admin Password.
    Tip: To find your password, log in at https://my.jive.com/pbx and then click Security in the left sidebar.
11. From System, click Enable Account and then click Save.
12. From Handset Settings, assign an Account to each Handset
    This will be the line used for inbound calls.
13. Assign a Default Account to each handset.
    This will be the line used for outbound calls.
14. Click Save.
15. Power cycle the base station to apply your changes.

Automatically forward incoming calls to an internal extension or external number.

Tip: If you need to forward a single call, press the Forward softkey while your phone rings to send the caller to another person.

1. Press the Menu softkey.
2. Select Features > Call forward > Line.
3. Turn On the desired forwarding type.
   • Always: Forwards all incoming calls.
   • No Answer: Forwards all unanswered incoming calls.
   • Busy: Forwards calls that arrive when you're already in a call.
4. Dial the forwarding destination (internal extension or external number).
5. If you selectedNo Answer, enter how many rings to wait before forwarding.
6. Press the Save softkey.

Stop your phone from ringing and send all incoming calls directly to voicemail.

1. Press the Menu key.
2. Select Features > Call > Do Not Disturb.
3. Use the left/right arrows keys to turn DND On/Off.
4. Press the Save softkey.

Check your voicemail from your phone.

1. Dial *99.
2. Dial your password (default 0000).
   Download your Voicemail Menu Guide.

Assign regularly dialed numbers to additional line keys on your phone.

Speak with two parties simultaneously by creating a mini-conference call on your line.

1. While on an active call, press the Conf softkey.
2. Dial the internal extension or external number to add to the conference.
3. Wait for the second party to answer, and then let them know that you would like to add them to a 3-way call.
4. Press Conf again.

Place a call on hold while you take some time to look up an answer to a question or answer another call.

1. Press the Hold softkey.
2. Press the Line key to retrieve the call.

Choose a new ringtone for your phone or assign a different ringtone to each of your lines.

1. Press the Menu key.
2. Select User Settings > Audio > Ringer Tone.
3. If there are multiple lines assigned to your phone, select the line you wish to modify.
4. Select the desired ringtone (highlight to sample ringtones).
5. Press the Save softkey.
   Note: This phone does not support silent ringtones.

Visually monitor the speed dial contacts assigned to your phone to know whether or not they are on an active call. These line keys will light up (busy lamp field) indicating if someone is busy or available.