How do I authorize and remove an IP address range?

For an individual who frequently changes networks (e.g. mobile users), you can authorize a range of IP addresses to allow them to roam more freely without needing to reboot their phone, or log out and back in to their mobile app each time their network changes.

Important: Please excuse our mess while we improve your admin experience. If you see GoTo Logo on your top nav bar, click here to view our GoTo Admin support content.
Before you begin: You must have admin or super admin permissions.
About this task: Authorizing IP address ranges is not required and is considered advanced.
  1. First, identify the IP address range and then perform a Google search for “my ip address”. Copy your public IP address that displays at the top of your results.
  2. Go to where YOUR_IP_ADDRESS is replaced with your IP address. For example, if your IP address was 10.20.333.444 you would go to

    If this method fails, navigate to and search for your IP address in the upper-right corner.

  3. Copy the CIDR.

    If necessary, you can double-check the CIDR by seeing if the CIDR ends in /8. If so, it is possible that the range belongs to another regional internet registry. If the Net Type mentions any of the following, you will need to perform a search from the respective registry:

    • AfriNIC
    • APNIC
    • LACNIC
    • RIPE NCC

  4. Verify the internet service provider (ISP) is correct.
  5. Format the network to include the subnet mask using CIDR notation. For example, where /24 is the subnet mask.

    If the provider is a cellular carrier, it is common to see “Service Provider Corporation” displayed as the ISP.

  6. Log in at
  7. Click Network Access in the left sidebar.

    To remove access, click the network you want to delete and then select Admin Portal Trash Icon and confirm the action by pressing Delete.

  8. Click Add Network Access Permission.
  9. Enter the CIDR as the Network and enable Reg and Prov.
  10. Optional: Enter an Expiration date for the network range and/or enter a Comment to help identify the network range.
  11. Click Admin Portal Checkmark Icon.
What to do next:
Tip: To edit these settings, click Admin Portal Edit Icon for the network you would like to edit. Click Admin Portal Checkmark Icon to save your changes.